Tachometers
AMETEK 1726 - Dual Function Digital Tachometer
|
The Ametek Model 1726, Dual Function Digital Tachometer is a dual function instrument providing contact and non-contact measurement of rotational and linear motions. With an accuracy of 0.25 of indicating reading 1 LSD, the 1726 is ideal for use in production, engineering, inspection, quality control and maintenance.
The Model 1726 comes complete with a convex tip, concave tip, 10 cm linear measuring wheel and carrying case. The power supply is a NEDA type 1604, 9 volt transistor battery, and the most significant display character flashes to indicate need for replacement.
The compact size and light weight of the 1726 makes for easy, one-hand operation while the rugged, high impact housing provides for years of dependable service.
|
|
|
 |
 |
 |
Contact or non-contact measurement |
|
Eight character display with floating decimal point |
|
Sixteen units of measure |
|
Unit measure always displayed |
|
Four memories last, maximum, minimum and average |
|
|
|
Display8 character dot matrix LCD, adjustable for different viewing angles, 3/8 inch character height Contact AdapterUtilizes interchangeable tips, Convex Tip, concave Tip and 10 cm linear measuring wheel MemoryLast reading, maximum, minimum, and average Power RequirementsNEDA type 1604, 9 Volt transistor battery Low Battery IndicatorMost significant display character flashes to indicate need for battery replacement Ranges Optical (non-contact) Revolutions per second REV / SEC 0.1000RS - 1666.0 RS Revolutions per minute REV / MIN 6.0000RM - 99999.0 RM Revolutions per hour REV / HR 360.00RH - 99999.0 RH Contact Revolutions per second REV / SEC 0.1000RS - 333.00 RS Revolutions per minute REV / MIN 6.0000RM - 20000.0 RM Revolutions per hour REV / HR 360.00RH - 99999.0 RH Linear Yards per second YDS / SEC 0.0110YS - 18.300 YS Yards per minute YDS / MIN 0.6600YM - 1100.0 YM Yards per hour YDS / HR 40.000YH - 66000.0 YH Feet per second FT / SEC 0.0330FS - 55.000 FS Feet per minute FT / MIN 2.000FM - 3300.0 FM Feet per hour FT / HR 120.00FH - 99999.0 FH Inches per second IN / SEC 0.4000IS - 660.00 IS Inches per minute IN / MIN 24.000IM - 39500.0 IM Inches per hour IN / HR 1420.0IH - 99999.0 IH Centimeters per second CM / SEC 1.0000CS - 1665.0 CS Meters per minute mtrs / MIN 0.6000mM - 1000.0 mM Meters per hour mtrs / HR 36.000mH - 6000.0 mH Miles per hour MILES / HR 0.0250MH - 37.500 MH |
EnvironmentalOperating Temperature: 32 Degrees to 122 Degrees F (0 Degrees - 50 Degrees C) Storage Temperature: -4 Degrees to 158 Degrees F (-20 Degrees to 70 Degrees C) Physical DimensionsUnit: 7.50 x 3.75 inch Case: Approximately 10.5 inch long, 7 inch wide, 2.375 inch deep Weight:2 lbs Ordering InformationV1726: Amteck Tachometer V1726-C: Amteck Tachometer with Certificate of Calibration tracable to NIST
|
|
|
 |
|
 |
