One of the most popular method used to measure the ultrasound Intensity (power) is by the RFB (radiation Force balance) method. The sonic force emitted by the Ultrasound transducer probe exerts a force proportional to the radiated sonic energy when intercepted by a target. This force is proportional to the emitted power. The UPM 2000 consists of three major components, a precision load cell, a metal cone with 45 degree angle with 3 inch base and a water (degas) tank with rubber liner for absorbing the reflected sound energy. The cone immersed in the degas water act as the interceptor. The cone is mounted on a precision load cell for accurate measurement of the excreted force by the ultrasound waves. The measures force is computed to watts.

UPM 2000 is compact, light weight and portable. It is battery operated.

The calibration of the UPM 2000 can be checked using the calibration weight standard given with the unit.

UPM 2000- ultrasound wattmeter comes with all standard accessories including AC adapter, carrying case, Transducer Clamp.

Most ultrasound standards specify water as the test media, since water approximates soft body tissues and fluids in propagation velocity and can be readily distilled, filtered, or degassed. Removal of some of the oxygen—preferably around 5 ppm—is necessary for accurate measurements. Small air bubbles cause secondary reflections and attenuation of beam radiation force, which causes lower power readings.

You may order Degassed water from Netech (PN: 1204) or any other source.

Therapeutic Ultrasound is a method of stimulating tissue beneath the skin's surface using sound waves. It is a very high frequency massage that can penetrate up to 5" below the surface of your skin. The sound waves are of a very high frequency, typically between 800,000Hz and 2,000,000Hz. The sound can not be heard by humans or animals. Humans can only hear sounds up to about 20,000Hz. This very high frequency sound affects very small molecules though like medicines and cells in your body and actually causes them to move.
Frequency
How ultrasound energy is transferred into the body is a function of many factors. The frequency of the ultrasound waves is actually opposite to how deep they will penetrate the body. A 1MHz ultrasound will penetrate about 4" below the skin whereas a 2MHz ultrasound unit will only penetrate about 2". While a low frequency means deeper penetration, using too low a frequency will mean that the waves are too wide to properly move the molecules. The frequency also has a significant impact on the phonophoretic properties of the ultrasound. Face mate Ultrasound has dual frequency, 1MHZ for deep penetration, and 3MHZ for skin and mesoderm.
Intensity
Power output is another significant factor. It is measured in watts per square centimeter. The higher the power, the more energy is transferred into the body. If too high a power output is used and an ultrasound unit is left sitting still on the body, it is possible to burn the tissue beneath the skin. While several professional ultrasound machines are capable of these high powers, your medical practitioner will typically use a low power setting. More power is not necessarily better. Practitioners usually use a higher power to speed up treatment though it is actually more effective to use a lower power setting for a longer period of time. Your Facemate has 8 power levels, up to 15 minute timer for each function
What does Ultrasound do?
The heating and massaging effects of Therapeutic Ultrasound have 3 primary benefits:
· Ultrasound therapy increases blood flow in the treated area which speeds the healing process.
· Ultrasound Therapy reduces swelling and edema which are the main sources of pain.
· Ultrasound waves gently massage the muscles, tendons and/or ligaments in the treated area. This enhances the recovery rate of damaged tissue without adding strain, and softens any scar tissue that is usually present in an injured area. More...